Related Manuals for Millennia LPE-2
Summary of Contents for Millennia LPE-2
- Page 1 Dedicated to the lives, memory, and families of Chris Camacho and Gabe Weiner — two young men who shared a passion for great audio, and who left us much too soon. Gabe 1970-1997 Chris 1959-1999 LPE-2...
-
Page 2: Read This First
It is the user's responsibility to understand the safe use and operation of this device. 4. The shipping box of the LPE-2 system will include (1) Owner's Manual, (2) LPE-2, (3) a UL approved power cord, (4) Owner's Registration Card. Fill out the Owner's Registration Card and return to Millennia Media at your earliest ability. -
Page 3: Safety Precautions
3. POWER SOURCES AND POWER CORD PROTECTION The LPE-2 Power Supply should be connected to a power source only of the type described in the operating instructions or as marked on the Power Supply. Route the power cord so that it is not likely to be walked on or pinched by having objects placed on it. -
Page 4: Quick Start
The LPE-2 enclosure measures approximately 19" wide x 3.5" high x 15" deep and is designed for mounting into a standard 2U, 19" equipment rack. If the LPE-2 is mounted in a road case or other rack which is prone to strong vibration or shock, it is highly recommended that the rear of the LPE-2 be supported or otherwise reinforced to withstand such conditions. - Page 5 The LPE-2 is a selectable mono or stereo processing chain which can be used with virtu- ally any modern or legacy phonograph cartridge. Any known type of legacy record press- ing (78, 45, 33, etc.) can be compensated perfectly with the LPE-2, including vertical...
- Page 6 An IEC-type AC line-power receptacle for use with removable cords. Use only the power cord provided with the LPE-2 unit or equivalent U/L approved type SV, SVT, SJ, or SJT AC power supply cord. Do not defeat the third pin earth ground. If ground lifting is desired, remove the Earth/Audio Ground Jumper Strap (topic #4, above).
- Page 7 LPE-2...
- Page 8 LPE-2 FRONT PANEL (1) PHONO PREAMP MUTE SWITCH "MUTE" Pushbutton switch (German ITT) which, when depressed and illuminated, mutes the selected front-end gain amplifier. Use this function when only one mono input is required. (2) MONO SELECT SWITCH "MONO (L+R)"...
- Page 9 LPE-2...
- Page 10 (10) POWER SWITCH "POWER" Rocker switch for switching AC line power on and off. (11) TEMPLATE (not shown) A session logging template for use with the LPE-2 Analog Legacy is available for download on the Millennia web site at: http://www.mil-media.com/LPE-2.html LPE-2...
- Page 11 LPE-2...
- Page 12 LPE-2...
- Page 13 301-304, 309, 906-920 700 Berliner speed = 71.29 RPM Blue Bird Blue Note Jazz Boston COL* Brunswick rare 1000 -8.5 Brunswick from 1946 Brunswick early 300-500 0 or -16 -10.5 Caedmon Caedmon 1001-1022 Cameo inconsistent, adjust as required Canyon Capitol Capitol-Telefunken LPE-2...
- Page 14 European Festival Folkways Good Time Jazz Gramophone 1925-1946 1946 1946-1954 500 or 800 american Handel Society -16 or -17 Haydn Society -16 or -17 Harmony Acoustics thru 8/29 Hit of the Week Kapp Kendall King Linguaphone L’Oiseau-Lyre London early LPE-2...
- Page 15 0 to –10.5 1933 -8.5 1935 300 or 500 1938 1938 – 1948 0 to -12 1948 -10.5 1949- -12 or -13 Rachmoninoff Society Radiofunken Remington Renaissance “RIAA” standard -13.7 Riverside Romeo inconsistent, adjust as required Schirmer 1000 Stradivari Supraphone Technicord LPE-2...
- Page 16 500 Hz turnover that requires an additional VLF boost using a 100 Hz shelving filter @ +3.0 dB. Often referred to as a "Columbia curve," some sources list this at 300 Hz turnover with similar HF and VLF characteristics. Better advice: trust your ears. LPE-2...
- Page 17 2 ea 500mA with 200-240V mains (5x20mm, slow-blow, 250V) Internal DC Power +25V, -25V Dimensions 19" W x 15.0" D x 3.5" H Net Weight approximately 26 pounds Millennia Media reserves the right to change specifications, delivery, and pricing without notice. LPE-2...
-
Page 18: Warranty
WARRANTY Millennia Media will repair this product, free of charge, in the USA, in the event of defect of materials or workmanship for one (1) year following date of purchase. This warranty is ex- tended only to the original LPE-2 purchaser. This limited warranty covers failures due only to...
Need help?
Do you have a question about the LPE-2 and is the answer not in the manual?
Questions and answers