Table of Contents
Advertisement
Cleaning and care
Stainless steel coloured controls
The controls may suffer discolouration or damage
if soiling is left on them for too long. Remove any
soiling straight away.
– Do not use stainless steel cleaners on the
controls.
When descaling the machine wipe up any spillages
of descaling agent immediately!
Aluminium fronts
Aluminium is affected by the way that light falls on it,
by the surrounding environment and by the angle
you observe it from.
Aluminium surfaces and controls may suffer
discolouration or damage if soiling is left on them
for too long. Remove any soiling straight away.
Warning: The surfaces and controls are susceptible
to scratches and abrasion.
Do not use:
– stainless steel cleaners,
– cleaning agents containing descaling agents,
– dishwasher detergent.
When descaling the machine wipe up any spillages
of descaling agent immediately!
Interior
Clean the interior of the machine with a solution of
hot water and washing up liquid. Wipe dry with a
soft cloth.
On the inside of the front there is a funnel.
Underneath the funnel is a small sponge to catch
any drips. Rinse the sponge out as necessary.
48
Hide quick links:
Advertisement
Table of Contents
