Adjusting The Interior Fittings - Miele KFN 8452 SD Operating And Installation Manual

Adjusting the interior fittings

Moving the shelves
The shelves can be adjusted according
to the height of the food.
^ Raise the shelf at the front, pull it out
half way, and then lift it out.
^ With the rear barrier facing upwards,
place the shelf at the required
position.
The rear barrier must face upwards
to prevent food from touching the
back of the appliance and freezing to
it.
The shelf which does not have this
rear barrier must always be fitted in
the top shelf position. This gives you
more flexibility for arranging storage
within the refrigerator.
(depending on model)
Split shelf
In order to accommodate tall items in
the appliance, one of the shelves is
divided. The front section can be
pushed under the rear section.
^ Pull the front half of the glass shelf
forwards slightly and then push it
carefully under the rear half.
22
Adjusting the door shelves
^ Push the door shelf upwards, then
remove it by pulling it forwards.
^ Replace the door shelf at the
required position. Ensure that it is
securely pushed back into position.
Moving the bottle divider
(depending on model)
The bottle divider can be moved to the
left or right to ensure that bottles are
held securely in position when the door
is opened and shut.