Table of Contents
Advertisement
The appliance is supplied right hand
hinged. If left hand door hinging is re-
quired follow the instructions below.
^ Open the lower appliance door.
^ Use a screwdriver to lever the plinth
fascia a out, then pull it forwards
and off.
^ Use a screwdriver to remove cover
b, then close the door.
^ Remove screw c completely.
^ Pull door support d together with
hinge pin e downwards, then tilt it
forwards and take it off.
^ Open the lower appliance door, move
it downwards and take it off.
^ With the upper door g closed, pull
hinge pin f downwards to remove it.
^ Open the upper door, and pull it
downwards and off.
Re-fit all parts on the opposite side
^ Remove the cover plate a.
^ Unscrew bearing block b and place
it on the other side (see illustration).
^ Unscrew upper hinge pin c using
the spanner supplied and refit on the
oppositie side.
^ Place cover plate a on the other
side.
^ Exchange cover i in the middle of
the appliance with hinge bracket e.
To do this:
Undo screws h, pull cover i and
hinge bracket e off to the side, turn
around and refit into position on the
opposite side.
39
Hide quick links:
Advertisement
Table of Contents
