Miele KF 7500 SNE ed-3 Operating And Installation Instruction page 15

During normal operation the
temperature displays show the
temperature in the StayFresh zone and
the temperature in the warmest part of
the freezer section.
If the temperature in the appliance is
not within the range that the appliance
is able to display (i.e. if it is not between
0 °C and 19 °C in the StayFresh zone
and if the temperature in the freezer
section is above 0 °C), bars will flash in
the temperature displays.
Depending on the ambient
temperature, it can take the appliance
up to 8 hours to reach the temperature
required and for this temperature to
then be shown as a constant
temperature in the display.
The
– a different temperature is being set,
– the temperature in the appliance has
risen by several degrees, indicating
that the appliance is warming up too
much.
This loss of coldness is no cause for
concern in the following circumstances:
– when the door has been left open for
a while, e.g. for removing or storing a
large amount of food,
– when fresh food is being frozen.
However, if the temperature in the
freezer section remains above -18 °C
for a long time, check that the frozen
food has not started to defrost. Do not
refreeze thawed or defrosted food! If it
has started thawing, check that the
food is safe to use and if it is, use it as
quickly as possible.
The appliance is supplied with the
brightness of the temperature display
set as low as possible. However, if the
door is opened, a setting changed or if
the alarm is sounding, the temperature
display will appear much brighter for
approx. 1 minute.
The level of brightness can be adjusted
to be:
–
button, and whilst holding it in,
pressing the upper button next to the
temperature display for the freezer
section.
–
, if button, and whilst holding it in,
pressing the lower button next to the
temperature display for the freezer
section.
by pressing the alarm
by pressing the alarm
15