Table of Contents
Advertisement
^ Using a pencil mark a line down the
centre of the inside of the furniture
door.
^ Hang the fixing bracket with the
fitting aids a onto the inside side of
the furniture door. Align the fixing
bracket centrally.
^ Attach the fixing bracket securely
using at least 6 short 4 x 14 mm chip
board screws b. (On cassette doors
only use 4 screws on the edges).
^ Pull the fitting aids upwards to
remove them c.
^ Turn them round and insert them right
into the middle slots on fixing bracket
d.
Installing the appliance
^ Hang the furniture door onto
adjusting bolts a.
^ Loosely attach the nuts b on the
adjusting bolts
^ Close the door and check the
distance between the door and
neighbouring furniture doors.
^ Align to match neigbouring doors if
necessary:
Side adjustments "X" are made by
sliding the furniture door, and height
adjustments "Y" by turning the
adjusting bolts a with a screwdriver.
To adjust depth "Z", loosen the
screws in the top of the appliance
door c.
By moving the furniture door, create a
gap of 2 mm between the furniture
door and the front edge of the niche.
39
Hide quick links:
Advertisement
Table of Contents
