Table of Contents
Advertisement
Installing the appliance
^ Push the appliance into its housing
unit.
When doing this, make sure that the
mains cable does not get trapped.
^ Depending on the thickness of the
appliance housing walls, push the
appliance into the niche until
– the spacer pieces touch the
housing unit wall (16 mm thick walls),
– or the front edges of the hinges are
flush with the side walls of the
housing unit (19 mm thick walls).
The cover strip must not protrude in
front of the edge of the housing unit.
It must disappear completely into
the niche.
Installing the appliance
^ Push the hinged side of the
appliance to the furniture wall.
^ On appliances with a niche width
of up to 550 mm:
Push fixing piece a (detail X) into the
slide and secure it with a short flat
headed 3.5 x 11 mm screw.
^ On appliances with a niche width
of more than 550 mm:
Secure plastic bracket a a to the
appliance on the door opening side
with 4 x 14 mm screws.
^ Then push the appliance into the
niche until the fixing piece or the
plastic bracket are flush with the front
edge of the of the housing unit floor.
37
Hide quick links:
Advertisement
Table of Contents
