Miele K 9554 iDF Operating And Installation Instruction page 46

Changing the door hinging
^ Undo ball joint d using a spanner
and remove it.
^ Stand the appliance door up, and
slacken the hinges at the front (the
hinges remain open).
^ Remove screws a, and place the
stoppers supplied c in the empty
holes.
Do not close up the hinges. Danger
of injury.
^ Replace the hinges in their diagonally
opposite corners b.
^ Use a powered screwdriver to secure
the hinges; screws a are
self-tapping.
46
To secure the soft-close mechanism
^ Place the door with the outer side
downwards on a stable surface.
^ Screw ball joint d of soft-close
mechanism c into the new fixing
holes.
^ Push tension spring a inwards
again.
^ Screw mounting b onto the hinge
and tighten securely.
^ Open out soft-close mechanism c
and hook it onto ball joint d.