48
The stopcock is closed.
The water inlet filter is
blocked.
The Waterproof system
has reacted.
The intake water has not
reached the required tem-
perature of 45 °C, the hot
water system may be
overloaded (see
"Programme selection").
Open the stopcock fully.
Before rectifying the prob-
lem you must:
– Turn the programme
selector to the "Stop"
position.
– Switch the dishwasher
off using the "On/Off"
button.
then:
– Clean the water inlet fil-
ter, see "Solving prob-
lems".
Call the Miele Service De-
partment.
– Start the programme
again.
– If the indicator light co-
mes on again select a
different programme.