Miele G 686-3 Plus Operating Instructions Manual page 31

Choose your programme according to
the type of load and how dirty it is.
In most cases this will be the Sensor
wash or the Sensor wash gentle o
programme.
The Sensor wash programme is ideally
suited to everyday mixed loads with
varying degrees of soiling.
The Sensor wash gentle o programme
should be used for lightly soiled
heat-sensitive crockery and for glass-
ware.
In these programmes sensors monitor
the soiling levels from the crockery and
adjust the programme sequence ac-
cordingly. Water and energy consump-
tion, temperatures and programme du-
rations can therefore vary.
The green Glass care indicator light will
come on if the programme selected is
suitable for glassware.
These include the Sensor wash gentle
o, Short 45 °, Economy, Normal 50 °,
Universal plus 55 °, Pre-wash and En-
ergy save programmes.
Additional programmes are also avail-
able.
They are all described in the
booklet, together with information on
when to use them and their consump-
tion data.
The additional function "Top Solo" can
be selected with each programme. See
"Additional functions/Top Solo" for more
details.
at the end of this
A hot water intake (temperature of the
incoming water) of at least 45 °C and
max. 60 °C is necessary for this
programme.
^ Use this programme for lightly to
normally soiled dishes.
Water is not heated up for the wash
programme.
Approx. 0.10 kWh of electricity only is
used during this cycle.
Because the water is not heated, drying
results may not match those of other
programmes.
The higher the temperature of the in-
take water, the better the cleaning and
drying results.
Open the dishwasher door at the end of
the programme to speed up the drying
process.
31