Miele G 656-3 Plus Operating Instructions Manual page 43

During the drying phase, as long as the
door of the dishwasher remains closed,
moist air is expelled through the ventila-
tion outlet for the drying fan. The drying
fan running time can be increased to
avoid the risk of damage to a worktop
fitted above the dishwasher. If this op-
tion is selected, the fan will continue to
run for approx. 14 minutes after the end
of a programme.
^ Switch the dishwasher off using the
"On/Off" button.
^ Turn the programme selector to the
"Stop" position.
^ Press the "Top Solo" button in and
whilst holding it in switch the dish-
washer on using the "On/Off" button.
Release the "Top Solo" button within
two seconds.
The "Salt" indicator light will flash.
If a different indicator light comes on or
flashes, the process must be repeated.
The "Rinse aid" indicator light will come
on if you have not yet added rinse aid
or if rinse aid needs replenishing.
^ Turn the programme selector to the
"9 o'clock" position.
– If the "Top Solo" indicator light does
not come on:
the fan running time is not increased,
– If the "Top Solo" indicator light does
come on:
the fan running time is increased.
^ Press the "Top Solo" button to change
the setting.
Depending on the previous setting the
"Top Solo" indicator light will either
come on or go out.
^ Turn the programme selector to the
"Stop" position.
^ Switch the dishwasher off using the
"On/Off" button.
The change is now stored in memory.
43