Miele G 643 Plus Operating Instructions Manual page 44

44
Water inlet fault.
The indicator light "In-
let/Drain", seen when the
door is open, is flashing.
There is a fault with the
drainage system.
Water remains in the wash
cabinet at the end of a
programme.
The indicator light "In-
let/Drain", seen when the
door is open, is flashing.
Before rectifying the prob-
lem you must:
Switch the dishwasher off.
– Open the stopcock
fully.
– Check the water inlet
filter and clean if nec-
essary, see "Cleaning
the water inlet filter".
– The water pressure at
the intake is lower than
0.3 bar. Seek profes-
sional advice.
– Clean the filter combi-
nation, see "Cleaning
and Care".
– Clean the drain pump,
see "Cleaning the drain
pump and non-return
valve".
– Clean the non-return
valve, see "Cleaning
the drain pump and
non-return valve".
– Remove any kink in the
drain hose.