Miele G 653 Installation Instructions Manual page 13

Dimension must be calculated and
noted before attaching the fixing
bracket.
Dimension is the distance shown on
the illustration between the drill hole in
the machine outer door panel and the
lower edge of the neighbouring unit
door.
^ Push the dishwasher into the recess
and adjust the height.
^ Calculate dimension .
^ Lay the door front down with the rear
side facing upwards. Draw a vertical
line down the middle of the door front
rear to use as a guide line.
^ Mark dimension
door front, up from the bottom edge.
If the two-piece panel is joined by
non-flush fixings these must be re-
moved. The fixing bracket supplied with
the dishwasher can be used to secure
both pieces.
Make sure that the combined height
worked out is retained.
onto the rear of the
13