Insufficient Salt" Message - Miele G 1832 Operating Instructions Manual

Do not fill the salt reservoir with
water.
^ Add salt only until the reservoir is full
or until water runs out of the opening.
The salt reservoir holds approx. 1 kg
of salt, depending on the brand
used.
Do not add any more than 1 kg of
salt.
As the salt reservoir is filled, displaced
water may overflow.
^ Clean any excess salt from around
the reservoir opening, and then close
the flap.
^ Run the Quick wash programme im-
mediately (without any crockery in
the dishwasher, and without selecting
the Turbo extra option) to remove any
traces of salt from the cabinet.
Before using for the first time

"Insufficient salt" message

^ Fill the salt reservoir with dishwasher
salt for reactivation when the
Insufficient salt
(If it appears during a programme,
wait until the end of the programme).
^ Confirm with
The "Insufficient salt" message will go
out.
After the salt reservoir has been filled,
the "Insufficient salt" message may still
appear in the display if the salt
concentration has not yet reached the
correct level.
If this is the case, confirm again with
OK
.
,
After refilling the salt reservoir,
run the Quick wash programme im-
mediately (without any crockery in
the dishwasher, and without
selecting the Turbo extra option) to
remove any traces of salt from the
cabinet.
In the UK, Miele branded dishwasher
salt is available from the Miele Spare
Parts Department or via the internet
on www.miele.co.uk.
message appears.
OK
.
19