Water Inlet / Drain Fault - Miele G 1542 Operating Instructions Manual

Water inlet / drain fault

Problem
The buzzer sounds.
The Inlet/Drain check
indicator alternately
flashes and lights up
constantly.
The buzzer sounds.
The dishwasher stops
during a programme.
The Inlet/Drain check
indicator flashes.
Fault code FXX shows
in the display.
Possible cause
The stopcock is
closed.
Faults F12/F13:
Water inlet restricted.
Fault F11:
Water outlet is
restricted, water
remains in the wash
cabinet at the end of a
programme.
Problem solving guide
Remedy
Open the stopcock fully.
Before rectifying the problem
you must:
– Switch the dishwasher off
with the On/Off button K.
– Open the stopcock fully.
– Clean the water inlet filter
(see "Maintenance").
– The water pressure at the
intake is lower than 30 kPa
(0.3 bar).
Seek professional advice.
– Clean the filter combination.
See "Cleaning and care".
– Clean the drain pump. See
"Maintenance".
– Clean the non-return valve.
See "Maintenance".
– Remove any kink in the drain
hose.
49