Miele G 1222 Operating Instructions Manual page 52

Problem solving guide
Problem
Dishes, cutlery
and glasses are
not dry or are
flecked.
White residue is
visible on cutlery
and crockery,
clouding occurs
on glassware; film
can be wiped off.
52
Possible cause
The amount of rinse aid
may be insufficient, or the
rinse aid reservoir empty.
Crockery was taken out of
the cabinet too soon.
Combination tabs have
been used which have
impaired drying
performance.
The "Combi tab" function
has been selected, but the
wrong type of detergent
was used.
Not enough rinse aid was
used.
There is no salt in the salt
reservoir.
The salt reservoir cap has
not been screwed on
correctly.
An unsuitable combination
detergent has been used.
The water softener is
programmed to a setting
which is too low.
Remedy
Replenish the reservoir,
increase the dosage or
change the brand of rinse aid.
See "Before using for the first
time".
Leave it in for longer. See
"Operation".
Set the Combi tab function to
"Normal", and fill the rinse aid
reservoir with rinse aid. See
"Additional functions".
Set the Combi tab function to
the detergent product being
used (see "Additional
functions").
Increase the dosage. See
"Before using for the first time
- Rinse aid".
Fill the salt reservoir. See
"Before using for the first time
- Filling the salt reservoir".
Replace it, making sure that it
screws back on correctly.
Change your detergent. Use a
standard liquid, tablet or
powder detergent.
Select a higher water softener
setting. See "Before using for
the first time".