Warning And Safety Instructions - Miele M 615-50 EGR Operating Instructions Manual

Warning and Safety instructions

This appliance complies with all
relevant legal safety requirements.
Improper use can present a risk of both
personal injury and material damage.
To avoid the risk of accidents and
damage to the appliance please read
these operating instructions carefully
before installation and before using it
for the first time. They contain important
notes on installation, safety, operation
and care of the appliance.
Keep these instructions in a safe place
and pass them on to any future user.
Correct usage
The appliance is intended for
domestic use only: to cook,
defrost, reheat and to grill food. Any
other usage is not supported by the
manufacturer and could be dangerous.
The manufacturer cannot be held liable
for damage caused by improper or
incorrect use of the appliance.
Never use the microwave to store or
dry items which could ignite easily.
Moisture evaporates. Fire hazard.
This appliance is not a toy! To
avoid the risk of injury, do not let
children access the appliance or its
controls. Supervise its use by older
children, the elderly or infirm. If allowing
older children to use the appliance
without supervision, please ensure that
they are aware of how a microwave
oven works and understand the
dangers of improper use.
8
Technical safety
If the connection cable is
damaged, the new cable must be
fitted by a Miele approved service
technician.
Do not use the microwave if
- the door is warped.
- the door hinges are loose.
- holes or cracks are visible in the
casing, the door, the door seal or the
oven interior walls.
Operating the appliance with this type
of damage will result in microwave
leakage and present a hazard to the
user.
Never open the casing of the
appliance.
Tampering with electrical connections
or components and mechanical parts is
highly dangerous and can cause
operational faults or electric shock.
Before connecting the appliance to
the mains supply, make sure that
the rating on the data plate
corresponds to the voltage and
frequency of the household supply. This
data must correspond in order to avoid
risk of damage to the appliance. If in
any doubt, consult a qualified
electrician.