Miele M 615-50 EGR Operating Instructions Manual page 46

Installation
Installation
The appliance must be built in
before it can be used. Otherwise it
poses an electric shock hazard.
1. Niche height 350 mm
^ Push the appliance into the unit and
pull the cable with the plug through
the back of the unit.
^ Connect the appliance to the
electricity supply.
46
^ Secure the appliance to the side
walls of the unit with screws a. Then
press cover caps b over the screws.
2. Niche height 360 mm
– Tall unit
^ Remove all the accessories,
including the turntable and the
carrier, from the microwave.
^ Place the microwave on its side.
^ Press feet c into the holes in the
base of the appliance.
^ Now proceed as described in
"1. Niche height 350 mm".
– Wall unit
When building into a wall unit, you will
also need to fit a spacer strip, which is
available from your Miele Dealer or the
Miele Spare Parts Department. It is
supplied with fitting instructions.
^ Now proceed as described in
"1. Niche height 350 mm".