Table of Contents
Advertisement
Date stamp
Frequency
Format
Default setting
Version
Menu Descriptions
Capture Mode Menu
The Capture Mode Menu allows you to choose from either a single photo capture or a 10 second
Self-Timer setup.
Resolution Menu
The Resolution menu allows you to choose the desired size of the images taken by your camera.
Keep in mind that images with a higher resolution will also take up more of your camera's
memory.
Quality Menu
The Quality menu allows you to select the desired quality level of the images taken by your
camera. Keep in mind that images with a higher image quality level will also take up more
memory on your camera.
Sharpness Menu
You can set the level of sharpness in the images taken with your camera. The sharpness level
dictates if the edges of objects in the image are more or less distinct.
Exposure Menu
The Light Exposure setting helps you control the amount of light that enters your camera's lens.
This setting should be adjusted when the environment is lighter or darker than normal.
When the environment has more light than is needed, reduce the exposure setting (by using the
negative - count) to reduce the amount of light allowed into the lens by your camera.
If the environment has less light (darker) than is needed, increase the exposure setting (by using
Date &Time /Date /Off
50Hz / 60Hz
Micro SD card
Cancel / OK
27
Date stamp
Select power frequency in
your location
Format the memory location
selection.
Default setting
See the firmware version
Hide quick links:
Advertisement
Table of Contents
