IMPORTANT ! Please check the contents of the carton are correct BEFORE assembling your new Flymo product. IF ANY PARTS ARE MISSING CONTACT:- Husqvarna Outdoor Products Customer Service Department direct Telephone : 0870 609 1901, Fax : 0870 609 1902...
Do not repair a damaged cable, replace it with a new one. Use only Flymo replacement cable. 10. Always wind cable carefully, avoiding kinking. 11. Never carry the product by the cable.
lock-off button washer Assembly Instructions Assembly of lower handle to hood (A) 1. Place the ends of the lower handle into the slots 2. Secure lower handle to hood by firmly pushing fix- ing pin through holes in hood and handle (A1). 3.
Adjusting the Cutting Height HIGHEST This symbol visible • • LOWEST This symbol visible • • • • • How to Use 1. Start at the edge of the lawn nearest to the power 2. Cut your grass twice a week during the growing Do Not Overload Your Product Using in long thick grass may cause the motor speed to drop, you will hear a change in the motor sound.
3. Plastic cutters should be straight. Replace if bent or twisted. Replacing Plastic cutters (S) • Use only genuine Flymo replacement plastic cutters specified for this product. These are available from all Husqvarna Outdoor Products Service Centres and major retail outlets.
A network of specialist dealers can be found in your local Yellow Pages. To obtain service on your Flymo product simply telephone or visit your local Service Centre. Should you require service under the terms of our guarantee the Service Centre will require proof of purchase.
Husqvarna Outdoor Products are manufactured under an Environmental Management System (ISO 14001) using, where practical, components manufactured in the most environmentally responsible manner, according to company procedures, and with the potential for recycling at the end of the products’ life. •...