Channel Assignments - M-Audio Torq Conectiv User Manual

Internal Mixer Mode
Computer
Powered Speakers
or PA

Channel Assignments

Once you have selected an audio interface and selected a mixer mode, you can assign the outputs of Torq to the channels
of the selected audio interface. The assignment options will differ depending on which mixer mode is active:
< Internal Mixer
» Master Output—click to access the drop-down menu and select the stereo output pair for the Torq
Master Output. This is the output you will connect to the speakers.
» Cue Output—click to access the drop-down menu and select the stereo output pair for cueing (or pre-
listening) to the output of a Deck. This is the output for the headphones.
» Line Input A—click to access the drop-down menu and select the stereo input pair for use as the Line
Input for Channel A of the Mixer.
» Line Input B—click to access the drop-down menu and select the stereo input pair for use as the Line
Input for Channel B of the Mixer.
» Control Input A—click to access the drop-down menu and select the stereo input to which your left
turntable or CD player is connected. This is also the Control Input used by AMPutate mode.
» Control Input B—click to access the drop-down menu and select the stereo input to which your right
turntable or CD player is connected.
Torq User Guide Torq User Guide
» »
External Mixer Mode
Computer
Channel 2 Channel 1
Headphone
Cue
DJ Mixer
78 78
Chapter 15 Chapter 1
Headphones
Powered Speakers
or PA