Mac Os X Installation - M-Audio Revolution 5.1 Quick Start Manual

Connecting the Speakers
The Revolution 5.1 facilitates a variety of configurations ranging from two to six speakers.
Connect the Left, Right, Center, Subwoofer, Left Surround, and Right Surround speakers
E
to the jacks on the Revolution 5.1. 5.1. Please refer to the manual for assistance with
N
identifying the specific output jacks.
G
Testing the Installation
L
Play a DVD or other surround media to enjoy your new surround system. Open the
I
Revolution 5.1 Control Panel to activate Circle Surround II™ and adjust the speaker settings.
S
H

Mac OS X Installation

Installing the Card
Shut your computer down, unplug it from its power source, and insert the Revolution 5.1
PCI card into an available PCI slot. For specific instructions on how to do this, please refer
to the Revolution 5.1 Manual's "Hardware Setup" section. Restart the computer.
Running the Installer
Insert the Revolution CD-ROM into your Macintosh CD-ROM drive and double-click the
Revolution CD icon that will appear on your desktop. In the Revolution CD-ROM window,
double-click the "Mac OS X" folder. Then, double-click the M-Audio Revolution "M-Audio
Revolution Installer.dmg" file. A 'virtual' disk called "M-Audio Revolution Software" will
open on your desktop. Double-click the "M-Audio Revolution.mpkg" and follow the
instructions on each screen.
Connecting the Speakers
The Revolution 5.1 facilitates a variety of configurations ranging from two to six speakers.
Connect the Left, Right, Center, Subwoofer, Left Surround, and Right Surround speakers
to the jacks on the Revolution 5.1. Please refer to the manual for assistance with
identifying the specific output jacks.
Testing the Installation
Play a DVD or other surround-enabled media to enjoy your new surround system.
Note: For Mac OS X systems below version 10.3, open the Revolution 5.1 control panel
to activate Circle Surround II™ and adjust the speaker settings. (Versions prior to 10.3
do not support AC-3 and DTS.) Apple DVD Player supports AC-3 and DTS on systems
with Mac OS X 10.3 and higher.
For information on other M-Audio products, please visit our website at
www.m-audio.com
2