Problem Solving; Questions And Answers - Toshiba 32AV623D Owner's Manual

Questions and
Below are the answers to some of the most
common queries.
For more information go to www.toshiba.co.uk
Q
Why is there no sound or picture?
A
Check the television is not in standby mode. Check the
mains plug and all mains connections.
Q
There is a picture, but why is there little or no
colour?
A
When using an external source, for instance, a poor
quality video tape, if there is little or no colour,
improvements may sometimes be achieved. The
colour is factory set to Auto to automatically display
the best colour system.
To check that you have the best colour:
a
With the external source playing, select Manual
Settings from the SETUP menu.
Manual Settings
Colour System: Auto
EXT 2 A
b
B b
With or choose between Auto, PAL, SECAM,
NTSC 4.43 or NTSC 3.58.
Q
Why doesn't the video/DVD being played show on
screen?
A
Make sure the VCR or DVD player is connected to the
television as shown on page 7, then select the correct
o
input by pressing
Q
Why is there a picture but no sound?
A
Check all lead connections.
No sound or unacceptable format sound may be
received.
Check the volume has not been turned down or that
sound mute has not been selected.
Answers
.
Q
Why is the VCR/DVD picture in black and white?
A
Check the correct input has been chosen, S-VIDEO or
AV. See AV Connection on page 39.
Q
What else can cause a poor picture?
A
Interference or a weak signal. Try a different television
station. Manual Fine Tuning may help.
a
Select the ATV Manual Tuning menu. Highlight the
station and press
Fine Tuning.
b
B b
Using or
Q
Press and then EXIT.
ATV Manual Tuning
Manual Fine Tuning: 0
1 I A
Q
Why don't the controls of the television work?
A
Check that Panel Lock is not On.
Q
Why doesn't the remote control work?
A
Check that the mode switch on the remote control is
in TV mode.
Check that the batteries aren't dead or inserted
incorrectly.
Q
Why is there a message permanently on the screen?
A
Remove it by pressing
Q
Why is the digital channel locked?
A
The channel has been selected in Locked Channels
(see 'Digital Settings' section).
Q
Why can only certain digital channels be viewed?
A
A Favourite list has been selected (see 'Favourite
Channels' section), set the feature to All Channels or
change channels by using the number buttons.
43

PROBLEM SOLVING

Q
c
, then press to select Manual
adjust to get the best picture and sound.
C 9 0
.