Connecting Your Tv; Connecting External Equipment - Toshiba 32AV623D Owner's Manual

Connecting external equipment

Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.
OPTICAL DIGITAL AUDIO OUTPUT
HDMI™ INPUT
SOCKETS
COMPONENT VIDEO INPUT (EXT 3)
SCART 2 (EXT 2)
SCART 1 (EXT 1)
*a decoder could
be Digital Satellite or
any other compatible
decoder.
Antenna/Cable
decoder*
media recorder
Aerial cables: - - - - - - - - - - - - - - - - - - - - - -
Connect the aerial to the socket on the rear of the television.
If you use a decoder* and/or a media recorder it is essential
that the aerial cable is connected through the decoder and/or
through the media recorder to the television.
SCART leads: . . . . . . . . . . . . . . . . . . . . . . . . . .
Connect the video recorder IN/OUT socket to the television.
Connect the decoder TV socket to the television. Connect the
media recorder SAT socket to the decoder MEDIA REC. socket.
Before running Auto Tuning, put your decoder and media
recorder to Standby.
The phono sockets alongside the COMPONENT VIDEO INPUT
sockets will accept L and R audio signals.
The Digital Audio Output socket enables the connection of a
suitable surround sound system. NOTE: this output is always
active.
HDMI™ (High-Definition Multimedia Interface) is for use with
a DVD decoder or electrical equipment with digital audio and
video output.
For acceptable video or PC signal formats through the HDMI
terminals, see page 49.
NOTE: Although this television is able to connect to HDMI
equipment it is possible that some equipment may not operate
correctly.
Illustration represents 32RV635D.
A wide variety of external equipment can be connected
to the back of the television; therefore, the relevant
owners manuals for all additional equipment must be
referred to for exact instructions.
We recommend SCART 1 for a decoder and SCART 2 for a
media recorder.
If connecting S-VIDEO equipment, set the INPUT for EXT 2.
See page 39.
If the television automatically switches over to monitor external
equipment, return to normal television by pressing the desired
programme position button. To recall external equipment,
o
press to select between DTV, EXT 1, EXT 2, EXT 3,
HDMI 1, HDMI 2, HDMI 3, HDMI 4, PC or ATV.
r
If button is pressed while viewing DTV mode, the picture
on your screen and the SCART output will become a still
picture.
When the external input mode is selected while viewing DTV
mode, the SCART socket does not output video/audio signals.
The SCART output will also be muted in EPG mode.
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are registered trademarks
of Dolby Laboratories.
HDMI, the HDMI logo, and High-Definition Multimedia
Interface are trademarks or registered trademarks of HDMI
Licensing, LLC.
INSTAPORT™ and INSTAPORT logo are trademarks of Silicon Image, Inc.
in the United States and other countries.
7

CONNECTING YOUR TV

POWER switch
FIXING STRAP
RS-232C port (for service use only)