Security Set-Up - Toshiba JK-MX16A Instruction Manual

6.5 8+2 Sequence
The camera sequence dwell time and camera selection that is displayed in the
upper left channel of an 8+2 display can be programmed in this menu. By
pressing the ENTER button while in the 8+2 Sequence menu, all connected
cameras will be added to the sequence selection of the upper left 8+2 display.
Once the ENTER button is pressed, the multiplexer will detect the presence of a
camera input signal and will automatically add each camera to the sequence
process.
Ch : Each camera can be programmed to sequence in any desired order within
this menu.
Dwell : 1 sec to 60 sec
6.6 12+1 Sequence
The camera sequence dwell time and camera selection that is displayed in the
center channel of a 12+1 display can be programmed in this menu. By pressing
the ENTER button while in the 12+1 Sequence menu, all connected cameras will
be added to the sequence selection of the center channel 12+1. Once the ENTER
button is pressed, the multiplexer will detect the presence of a camera input signal
and will automatically add each camera to the sequence process.
Ch : Each camera can be programmed to sequence in any desired order within
this menu
Dwell : 1 sec to 60 sec

7. Security Set-up

Menu Lock
Sets security lock On/Off for the menu operation. When setting to On, the security
code (access code) will be required to operate the menu.
1 Off
: Does not lock the menu operation.
2 On
: Locks the menu operation.
To set the access code:
From the main menu, select the "Security Set-Up" in order to enter the security
menu.
By pressing the
field will be displayed.
Access Code: ....
At this point, enter a four digit password by using the CAMERA SELECT buttons 1
through 10. The message "Re-enter to confirm" will appear. Re-enter password to
confirm.
Button Lock
Sets security lock On/Off for the button operation of the Front panel. When setting
to On, you can not operate the Front panel.
1 Off
: Does not lock the button operation.
2 On
: Locks the button operation.
Remote Lock
Sets security lock On/Off for the remote control operation. When setting to On, you
can not operate the remote control.
1 Off
: Does not lock the remote control operation.
2 On
: Locks the remote control operation.
- 29 -
Button while the cursor is on the "menu Lock", the access code
8+2 Sequence
1:ch1 07:ch7 12:ch12
2:ch2 8:ch8 13:ch13
3:ch3 9:ch9 14:ch14
4:ch4 10:ch10 15:ch15
5:ch5 11:ch11 16:ch16
6:ch6 Dwell: 03sec
ENTER:Auto Set-up
:Select :Set-up
MENU:Accept & Return
12+1 Sequence
1:ch1 07:ch7 12:ch12
2:ch2 8:ch8 13:ch13
3:ch3 9:ch9 14:ch14
4:ch4 10:ch10 15:ch15
5:ch5 11:ch11 16:ch16
6:ch6 Dwell: 03sec
ENTER:Auto Set-up
:Select :Set-up
MENU:Accept & Return
Security Set-up
Menu Lock: Off
Button Lock: Off
Remote Lock: Off
:Select :Set-up
MENU:Accept & Return
Security Set-up
Menu Lock: On
Button Lock: Off
Remote Lock: Off
Access Code: . . . .
Camera:1~9,10(0)