Yamaha S03 voice editor Owner's Manual page 22

8 RESO
Sets the LFO Resonance level.
9 ATTACK
Sets the Attack Rate.
) DECAY1
Set the Decay1 Rate.
! DECAY2
Set the Decay2 Rate.
@ LEVEL
Sets the output level of the wave.
# PAN
Sets the Pan setting.
$ REVERB
Sets the Reverb Send Level.
% CHORUS
Sets the Chorus Send Level.
^ RECEIVE NOTE ON
Selects whether or not to receive the MIDI Note On message.
& RECEIVE NOTE OFF
Selects whether or not to receive the MIDI Note Off message.
* KEY ASSIGN
Selects Single key assignment or Multi key assignment.
( ALTERNATE GROUP
Selects an alternate group number. This is used to prevent a pair of drum sounds, such as an
open and closed hi-hat, from sounding simultaneously.
º PITCH
This graph shows the 6 and 7 settings visually. You can also change the settings by dragging
the squares in the graph.
¡ FILTER
This graph shows the 7 and 8 settings visually. You can also change the settings by dragging
the square in the graph.
™ AMPLITUDE EG
This graph shows the 9, ) and ! settings visually. You can also change the settings by
dragging the squares in the graph.
22