Xtreamer Pro User Manual page 90

Advanced Users Guide
10. Firmware upgrade
2. After window message appears, Xtreamer will be rebooted, and then Firmware update will start.
3. You will be able to see the progress of firmware upgrade; it normally takes approximately 5 minutes
to be completed
- Depending on firmware, screen setting will be able to be initial set value.
- If you can't see the screen, try it after reconnecting composite.
Note: Please make sure to use a USB stick\disk-on-key no bigger than 2GB. Format the stick to FAT32.
After the process is finished, you must perform a RESTORE DEFAULT via the SETTINGS menu
This will remove all your saved pre-sets.
90