Wintal Digital Video Recorder User Instruction Manual page 28

Name
Power switch
IR receiver
POWER Power indicator, lighting constantly when connected power
RUN Working indicator, flashing after boot normally
ALARM Alarm indicator, flashing when alarm is activated
HDD HDD indicator, flashing when access HDD date
1-4CH record Corresponding channel record indicator (it lights when corresponding channel
indicator is recording)
Entry playback and backup interface
Entry input interface
Menu Entry system menu
―OK‖ key
ENTER
―Cancel‖ key
ESC
1. Direction key ―UP‖
1. Direction key ―DOWN‖
Direction key ―LEFT‖
Direction key ―RIGHT‖
1. 4-screen display or channel 1 full screen
enable
1. 4-screen display or channel 2 full screen
disable
1. 4-screen display or channel 3 full screen
area setting
1. 4-screen display or channel 4 full screen
area setting
1. Entry playback and backup interface
under playback mode
Stop playback
Jump backward under playback mode.
Jump forward under playback mode.
Entry the ―Manual Record‖ interface
●
LCD
LCD display ON/OFF
2. Display the status bar in preview mode
2. Hide the status bar in preview mode
3. Select pane ―1‖ in cover area setting
3. Select pane ―2‖ in cover area setting
specification
2. Motion and Shelter area
2. Motion and Shelter area
2. Select pane ―3‖ in cover
2. Select pane ―4‖ in cover
2. Pause/Play recording file,
27