Advertisement
FIGURE 15
Step 88.
Insert one BALL end of UPPER CABLE (93) down through one SLOT in RIGHT TOP CROSS
FRAME (11) and the other BALL down through other SLOT.
Step 89.
Place a PULLEY (76) into each SLOT in RIGHT TOP CROSS FRAME (11) and fasten with 3/8" x
2" HEX BOLTS (51), 3/8" WASHERS (62), 13mm BUSHINGS (46) and 3/8" LOCKNUTS (67).
Step 90.
Insert BALL end of UPPER CABLE (93) through SLOT in RIGHT OBLIQUE FRAME (2) and
fasten with 3/8" x 2" HEX BOLTS (51), 3/8" WASHERS (62), 13mm BUSHINGS (46) and 3/8"
LOCKNUTS (67).
Step 91.
Place UPPER CABLE (93) in groove of PULLEY (76) and attach to DOUBLE PULLEY BRACKET
"A" (39) with 3/8" x 2" HEX BOLT (51), 3/8" WASHERS (62) and 3/8" LOCKNUTS (67).
Step 92.
Attach PULLEY (76) to DOUBLE PULLEY BRACKET "B" (40) with 3/8" x 2" HEX BOLT (51), 3/8"
WASHERS (62) and 3/8" LOCKNUT (67).
Step 93.
Attach one end of BUTTERFLY CABLE (92) to either ADJUSTABLE PLATE (27 RIGHT or 29
LEFT) with M8 x 25mm HEX BOLT (48), M8 WASHERS (64) and M8 LOCKNUT (69).
Step 94.
Insert BUTTERFLY CABLE (92) down through PIVOT PULLEY BRACKET (32), under PULLEY
(76) in DOUBLE PULLEY BRACKET "A" (39), up through other TURN PULLEY BRACKET, and
attach to other ADJUSTABLE PLATE (27 RIGHT or 29 LEFT) with M8 x 25mm HEX BOLT (48),
M8 WASHERS (64) and M8 LOCKNUT (69).
Step 95.
Make sure cables are riding in groove of PULLEYS (76).
Step 96.
See DETAIL for proper cable routing.
32
Hide quick links:
Advertisement
