Loudbox 100
TM
Stereo Blending
If your instrument has two signal sources (typically mini-mic and pickup) and stereo output, you may
route these signals into separate channels of the amp and blend them independently for your own
custom mixes.
1) Plug in a stereo (TRS) instrument cable
between your guitar and the Channel 2, 1/4-inch
input.
2) Pickup (tip) is routed to Channel 2 and Mic
(ring) is routed to Channel 1.
3) Turn on phantom power if mini-mic requires it.
������������������
���������������������
Below are setup instructions for two common Fishman products with stereo blending capability. For
other products, follow the manufacturer's instructions for setup.
Prefix Premium Blend
& Prefix Stereo Blender
Open battery compartment and move switch to "stereo."
Rare Earth Blend
1) Rewire jack for stereo operation
2) Move thumbwheel on pickup toward treble strings.
Acoustic Instrument Amplifier
��������������������������
������������
����������������������������
����������
STEREO CABLE
Mono / Stereo
Switch
MONO / STEREO
Negative Battery Wire
Microphone Signal
(red) to Switch
(black) to Ring
Pickup Signal
Shield to
(white) to Tip
Sleeve
12