Troubleshooting - Monster PowerCenter HTS1700 Owner's Manual

Symptom
The PowerCenter is
not receiving power .
16

TROUbleSHOOTInG

Possible Cause
The PowerCenter
is not turned On .
Too many devices are
connected, causing an
overload, tripping the
Thermal Circuit Breaker .
Remedy
• Turn the PowerCenter switch on.
• Make sure the PowerCenter's AC power
plug is plugged into a properly grounded
120 volts (nominal) wall outlet .
• In some households, a wall switch may need
to be thrown to make the wall plug active .
Try turning on the light switches located near
the wall unit .
• Press the PowerCenter Thermal Circuit
Breaker button in to reset . Please allow
10 minutes before attempting to reset .
If you reset too soon, the breaker will
prematurely sense power overload
and not allow unit to operate .
• If the Circuit Breaker continues to trip, try
moving one or more components to another
PowerCenter . You may be drawing too much
current through one PowerCenter .