Monster AirTalk User Manual & Warranty Information page 7

Putting AirTalk Hands-Free Kit into
™
Pairing Mode and Connecting with
a Bluetooth-Equipped Mobile Phone
1. Make sure to turn on AirTalk
within a meter of your mobile phone and activate the
mobile phone's Bluetooth function.
2. Press and hold button for 7–8 seconds until the LED
light rapidly flashes blue and red alternately.
3. Consult your Bluetooth-equipped mobile phone's
manual, as connection varies by device. When
prompted, enter the passkey "0000 (four zeroes)."
AirTalk Hands-free Kit will make beep twice when
connected and then the blue LED light will flash once
every 10 seconds.
Hands-free Kit. Place it
Using AirTalk Hands-free Kit
™
• Answering a call
Press and release either the
or button once to accept a call.
• Ending a call
Briefly press button to end a call.
• Redial last number called
[dependent on the mobile phone]
Press and hold button for 2 to 3 seconds until
you hear two beeps. Your mobile phone will redial
the last number called.
NOTE: The redial function may vary by phone model.
Some phones simply display the last number dialed,
which requires you to hit the button twice. Consult your
owner's manual.
button, button,