ActionTec Wireless PC Card Manual page 10

Vll
7. Click on the Configuration tab. This will take you back to the screen from step 2.
In the "Primary Network Logon:" box, located just above the "File and Print
Sharing" button, make sure that Client for Microsoft Networks is selected. If it is
not then click the down arrow and select it from the given list. Click OK.
8. A screen will appear asking you to restart your computer. Click Yes to restart the
computer. If you do not see this screen please restart your computer manually. After
your computer restarts you will be asked to supply a User Name and Password.
Enter whatever you would like but be sure to write down these values, as they will
enable you to access your network.
18
Configuring File and Print Sharing
9. After your computer has restarted and you entered a password and user name, you
must enable a file or drive for sharing. Locate the file or drive you wish to share.
(The easiest way to achieve this is through your Windows Explorer, located in the
start menu) Right click on the File or Drive you wish to share. In the given menu
select Sharing.
10. The following screen will appear. Please select Shared As. This will enable other
users on your network to see the file or drive you selected. Then you can chose the
Access Type:
Read Only: This will allow other users on your network to view and read the file
or drive you selected. They will not be able to modify it in any way. You can fur-
19
Configuring File and Print Sharing
Vll