ActionTec PCI 802.11b Manual page 12

Depends on Password: Allows you to have both Read Only and Full Access
files on the shared file or drive. The level of access will depend on the
passwords you enter in the appropriate field.
When you finish, click Apply, then OK.
Vll
11. To share your printer, select Start, Settings, and then Printers.
12. Right-click on the printer you want to share. Select Sharing from the list that
appears as shown below.
22
Configuring File and Printer Sharing
13.Enable sharing by selecting Share As. A default name for the printer will be
created in the Share Name text box. Set a password for the printer at this time if
you want to restrict printer use on the network. Set the default printer settings by
modifying information on the other tabs of this window.
Windows 2000
1. After you install and configure the PCI 802.11b Wireless Adapter, Windows 2000
automatically enables file and print sharing for your computer. The only items
that need to be changed are your Workgroup settings. All the computers on your
network must have the same Workgroup name. To check or change the
Workgroup name, right-click on the My Computer icon on your desktop and
select Properties from the list that appears.
2. The "System Properties" window appears, as shown below. Select Network
Identification. If the "Workgroup" name is the same as the other computers on
your network, click OK. If not, select Properties.
23
Configuring File and Printer Sharing
Vll