ActionTec MyWirelessTV MWTV200T User Manual page 8

MyWirelessTV User Manual
Sync LED e Sync LED, located on the front of the Transmitter, is
used to display the state of synchronization between the Transmitter
and Receiver(s). If it is blinking or o , the Transmitter is not
synchronized with any Receivers. If it is glowing steadily,
synchronization has been established with at least one Receiver.
Sync Button e Sync button, located on the front of the Transmitter,
is used set up synchronization with a Receiver or Receivers.
Power LED e Power LED, located on the front of the Transmitter, is
used to display the state of the Transmitter's power. If unlit, the unit is
o . If lit, the unit is on.
e Mini USB port, located on the front of the
Mini USB Port
Transmitter, is used to connect a USB stick drive to the Transmitter
when a rmware update is available. See "Updating MyWirelessTV's
Firmware" for more details. It is also used for the USB backchannel
feature.
e Reset button, located on the front of the
Reset Button
Transmitter, is used to reset the transmitter to factory default settings.
7