Mitsubishi Electric MDT652S User Manual page 51

OSD screen functions (continued)

HEAT STATUS
The statuses of the cooling fan, brightness, and internal
temperature are displayed.
NOTE: The cooling fan starts running according to the
operating temperature or when COOLING FAN is
ON in the SCREEN SAVER menu.
When the operating temperature substantially
exceeds the operation guaranteed range, the
message "TEMPERATURE WARNING!!" is displayed
on the screen.

POWER ON DELAY
You can adjust the delayed time until the power-on mode
is activated at the time of recovery from the sleep mode or
power-on.
The time is selectable from OFF and 2, 4, 6, 8, 10, 20, 30,
40, and 50 seconds.

TERMINAL SETTING
You can select the mode to display the RGB1 (HDMI)
or RGB2 (DVI-D) signal according to their signal format
depending on their source device.
DVI-MODE:
Select this setting when displaying the RGB2 (DVI-D) signal.
Select DVI-PC when the source device is a PC.
Select DVI-HD when the source device is a video
device.
HDMI SIGNAL:
Select this setting when displaying the RGB1 (HDMI) signal.
Select LIMITED when displaying the signal that uses 16
to 235 levels of 256 levels for each of R, G, and B. This
mode is used primarily when input comes from a video
device.
Select FULL when displaying the signal that uses all 256
levels (from level 0 to 255). This mode is used primarily
when input comes from a computer.

DDC/CI
Use to turn ON or OFF the DDC/CI communication function.
Select ON for normal use.

CLOSED CAPTION
You can select to display or hide captions.
OFF: Captions are hidden.
CC1: Captions are displayed in sync with the
primary audio.
CC2: Information (related to the primary
audio) is displayed without sync.
CC3: Captions are displayed in sync with the
secondary audio.
CC4: Information (related to the secondary
audio) is displayed without sync.
TT1/TT2/TT3/TT4: Four types of information not related to
the displayed images are displayed. (For
example, news and weather forecast.)
NOTE: Check with each supplier of your video software and
external video devices in advance whether they are
compliant with EIA-608-A.
If their video signals are not compliant with it,
images may not be displayed correctly.

ADVANCED OPTION RESET
Selecting ADVANCED OPTION RESET allows you to
reset all OSD settings from ADVANCED OPTION settings,
except for DATE AND TIME, SCHEDULE, DVI MODE, HDMI
SIGNAL, MONITOR ID, and DDC/CI.
English-50