Series Recording Connection; Remote Recording Connection; Connection For External Time Clock Adjustment; Setting The Clock - Mitsubishi HS-1024E Installation And Operation Manual

Connections for Various Functions (Cont.)

Series Recording Connection

Connect VCRs to be used as shown below.(
ALM RST REC GND ALM
IN

Remote Recording Connection

Connect the VCR with a remote switch as shown below. (

Connection for External Time Clock Adjustment

Connect VCRs as shown below. (
Switch
ALM RST REC GND ALM
IN
*1 : When connecting the MODE OUT terminal of the first VCR with the RST IN terminal of the second VCR,
the on-screen clock of the second VCR can be adjusted to that of the first VCR.

Setting the Clock

Accurately set the day and present time before timer programming.
Day Year
Month
09-07-'01 20:25:00 A0001
20
Installation
page 13 for the menu setting)
MODE CLK CALL
OUT
1st VCR
ALM RST REC GND ALM
IN
Remote switch
page 21 for the menu setting)
MODE CLK CALL
OUT
1st VCR
Alarm
Recording
Minute Counter
Hour Second
ALM RST REC GND ALM
IN
2nd VCR
*1 : This connection is necessary
in case of Series Recording 2 .
page 13 for the menu setting)
MODE CLK CALL
OUT
*1
ALM RST REC GND ALM
IN
• '00 indicates year 2000.
• The clock is shown in 24-hour format.
• Alarm recording counter is shown during alarm recording
only.
Note A point to notice
*1
MODE CLK CALL
OUT
MODE CLK CALL
OUT
2nd VCR
Supplementary information
Info.