4
•
Turn both the frame and seat post
assemblies upright.
•
Fit the seat post assembly onto the
frame assembly.
•
Insert two screws into the seat post
and tighten.
Hint: You may want to insert the frame
cover with bolt into the frame assembly
before inserting and tightening screws in
the post.
5
•
Insert the frame cover with bolt into the
hole on the side of the frame assembly.
•
Fully tighten the bolt.
5
Assembly
•
Hint: The handlebar will only fi t one way
onto the console. If it does not seem to fi t,
turn it around and try again!
•
Frame Cover
(with Bolt)
•
Handlebar
6
Fit the handlebar onto the frame,
as shown.
Insert two screws into the handlebar
and tighten.
Pull up on the handlebar to be sure it
is secure.