DiamondDigital DV322 User Manual page 4

Wide screen lcd flat panel display 32” (81.3 cm) lcd panel size
Table of Contents

Advertisement

Read before operating the appliance
Follow all warnings and instructions marked on this TV.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding- type
plug. A polarized plug has two blades with one wider than the other. A
grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched, particularly at
plugs, convenience receptacles, and at the point where they exit from
the apparatus.
11. Only use the attachments/accessories specified by the manufacturer.
12
Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when
moving the cart/appliance combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the appliance has been damaged in any way, such as when a
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
15. Warning-To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
16. Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, shall not be placed on the apparatus.
17. The apparatus is entertainment use only and visual display takes are
excluded.
Do not place any objects on top of the TV. They may fall or cause
a child to climb up to retrieve the objects.
CAUTION
PREVENTION OF SCREEN BURN IN
:
Continuous on-screen displays such as video games, stock market quotations, computer generated graphics and
other fixed (non-moving) patterns can cause permanent damage to the TV. Such "SCREEN BURN IN" constitute
misuse and are NOT COVERED by our Factory Warranty.
PUBLIC VIEWING OF COPYRIGHTED MATERIAL
Public viewing of programs broadcast by TV stations and cable companies, as well as programs from other sources, may require prior
authorization from the broadcaster or owner of the video program material.
IMPORTANT SAFETY INSTRUCTIONS
18. The Shock Hazard Marking and Associated Graphical Symbol is
provided on the bottom panel of the unit.
19. This apparatus is designed to comply with the recommended safety
standards for tilt and stability.
Do not pull the cabinet with excessive force. Doing so can cause the
product to overturn, resulting in damage to the product and/or
personal injury.
20. Follow instructions for wall, shelf, or ceiling mounting as
recommended by the manufacturer.
21. An outdoor antenna should not be located in the vicinity of overhead
power lines or other electrical circuits.
22. If an outdoor antenna is connected to the receiver, ensure that the
antenna is grounded to provide some protection against voltage
surges and built up static charges. Section 810 of the National
Electric Code, ANSI/NFPA No. 70-1984, provides information with
respect to proper grounding for the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit, size of
grounding connectors, location of antenna-discharge unit,
connection to grounding electrodes and requirements for the
grounding electrode.
GROUND CLAMP
ELECTRIC
SERVICE
EQUIPMENT
NEC NATIONAL ELECTRICAL CODE
Note to the CATV system installer: This reminder is intended to point the
CATV system installer to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the
cable's ground wire shall be connected to the grounding system of the
building, as close to the point of cable entry as possible.
Disposal of this product may require specific instructions
pertaining to your resident state. For disposal or recycling
information, please contact your local authorities or the
Electronic Industries Alliance: www.eiae.org.
ANTENNA
LEAD IN
WIRE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUNDING CONDUCTORS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250 PART H)
3

Advertisement

Table of Contents
loading

Table of Contents