Table of Contents
Advertisement
COMPONENT NAMES (continued)
Remote Control
PROGRAM / ADJUST (
Installing the Batteries
1. Open the battery cover.
Slide back and remove the battery cover in
the direction of the arrow.
2. Installing the batteries.
Install two included Size AAA batteries
observing the correct polarities(+,-).
3. Close the battery cover.
Replace the battery cover in the direction of
the arrow and snap it back into place.
CAUTION
Do not mix new and old batteries together. The batteries could explode or leak,
resulting in fires, physical injury, or stains.
When inserting batteries, observe their correct polarities as marked on the
product. If inserted in the wrong direction, the batteries could explode or leak,
resulting in fires, physical injury, or stains.
16
DISPLAY
TV TUNER
NUMBER KEYPAD
PICTURE
ASEPCT
MENU
)
SOURCE
PC
AV4
AV1
INDEX
TEXT
SUB
HOLD
MUTE
LED INDICATION
POWER ON/OFF
CH (
) or power
on
VOLUME (
)
SLEEP
RECALL
RETURN
SELECT (
)
ENTER
I/II
AV3
HDMI
AV2
MODE
REVEAL
CANCEL
SIZE
Handling the Remote Control
Use the remote control within about 16 feet from front of the unit's remote-
control sensor and within 30 degrees on both sides.
Within 30 degrees
About 10 feet
ATTENTION
Do not drop the remote control.
To avoid possible failures, do not splash the remote control with water or
put it on a wet object.
If leaving the remote control out of use for an extended period of time,
remove the batteries from it.
If the remote control does not respond properly, replace the batteries.
Strong light such as direct sunlight exposed on the photoreceptor of the
remote control can cause operational failure. Position this unit to avoid
direct contact with such light.
Within 30 degrees
About 10 feet
About 16 feet
Advertisement
Table of Contents
