Mitsubishi Electric XL7000U User Manual page 25

Viewing video images (continued)
Projector + DVD player or HDTV decoder
Some DVD players have an output connector for 3-line fitting (Y, C
projector, use the COMPUTER/COMPONENT/VIDEO IN 2 terminals.
G B R
Y C (P ) C (P
B B R
DVD player or HDTV decoder
• The terminal's names Y, P
• The terminal's names vary depending on the connected devices.
• Use BNC cables for connection.
• Image may not be projected correctly with some DVD players.
• If colors aren't displayed correctly when the projector is connected to a high-definition video device having R, G,
and B output terminals, set COMPUTER INPUT to RGB in the SIGNAL menu. (See page 36.)
Connecting to video equipment having a HDMI terminal or DVI-D terminal
You can project high-quality images by connecting the COMPUTER/COMPONENT/VIDEO DVI-D IN (HDCP) terminal
of this projector to video equipment having a HDMI output terminal or DVI-D terminal. In addition, this projector
supports HDCP and is able to receive encrypted digital video data that are output from DVD players.
• HDCP (High-bandwidth Digital Content Protection), developed by Intel Corporation, is a method to encrypt digital
video data for the purpose of copy protection.
• HDMI (High-Definition Multimedia Interface) is fully backward compatible with computers, displays and consumer
electronics devices incorporating the DVI standards.
• This projector can be linked with video devices equipped with HDMI output terminal or DVI-D output terminal.
However, with some of them, this projector may not display any image or not operate correctly.
• If this projector doesn't display any image or not operate correctly, see the operation manual of the video device
for its connection.
• Use of a long cable may decrease the quality of projected images.
Connection (for video equipment having an HDMI terminal)
• Use a commercially available HDMI (with HDMI logo) cable.
• You don't have to connect any cable for audio input. You can input video and audio using an HDMI cable only.
• When HDMI audio isn't output, it may be output by turning off the power of the video equipment with the projector
and the video equipment connected to each other and then turning back on the power.
• Some cables may not be connected correctly depending on the size and shape of their connectors.
• When HDMI is selected as the input source, settings of FINE SYNC., TRACKING, HOLD, etc. are unavailable.
• During power standby, HDMI audio isn't output from the speaker and the AUDIO OUT terminal on the projector.
Equipment having an
HDMI terminal
BNC-RCA connector (option)
)
R
Audio cable (option)
To audio output
terminals
, and P are given as examples of when a HDTV decoder is connected.
B R
To HDMI terminal
HDMI (with HDMI logo) cable (option)
, C ). When connecting such DVD player with this
B R
BNC cable (option)
COMPUTER/COMPONENT/
VIDEO IN 2
AUDIO IN 2
EN-25
HDMI IN