Fisher-Price GROW-WITH-ME TRIKE 72667 Instructions Manual page 5

Pedal Hub
Pedal Axle
Slot
• Place two pedal hubs on the pedal axle so that the metal
tabs on the pedal axle fit into the slots inside each pedal hub.
Pedal Hubs
Pedal Axle
Rectangular Hole
• While holding the pedal hubs on the pedal axle, insert the
assembly into the rectangular hole in the front wheel.
• Push the pedal hubs in until they are flush with the surface
of the front wheel.
Pedal Hub
Pedal Hub
• Turn the front wheel assembly over.
• Insert a pedal hub on top of the pedal axle and into the
rectangular hole in the front wheel.
• Insert the remaining pedal hub below the pedal axle and
into the rectangular hole in the front wheel.
Assembly
Metal Tab
Metal Tab
Pedal Hub
Front Wheel
Pedal Hubs
Pedal Axle
• Push the pedal hubs in until they are flush with the surface
of the front wheel.
• Insert a lock washer into the pedal slot. Make sure the
raised tabs on the lock washer are facing the closed or
outside end of the pedal.
• Insert the other lock washer into the other pedal.
• Place a scrap block of wood under the front wheel assembly.
• Fit a pedal on the pedal axle.
• With the lock washer centered over the pedal axle end, tap
the pedal with a hammer until it is secure.
• Repeat this procedure to attach the other pedal to the other
5
end of the pedal axle.
Pedal Hubs
Lock Washer
Raised Tabs
Pedal Slot
Closed End
Lock Washer
(Inside Pedal)
Pedal
Pedal Axle