Assembly - Fisher-Price WILD THING 74180 Owner's Manual & Assembly Instructions

F
1
Vehicle
Rear View
Body
• Position the vehicle body upright.
• Fit and hold a round bushing into the hole in the rear
of the vehicle body.
2
Screw
Peg
Bottom View
• Position the vehicle body upside down.
• Slide the end of the metal bracket with the large hole
through the slot in the rear of the vehicle body to cover
and hold the round bushing.
• Align the small hole at the other end of the bracket
with the screw peg on the vehicle body.
1
• Insert a #12 x 1 / " screw through the small hole in the
2
bracket and into the screw peg.
• Tighten the screw with a Phillips screwdriver. Do not
over-tighten.

Assembly

Round Bushing
Hole
Metal Bracket
Large Hole
Slot
Vehicle
Body
3
Screw Peg
3a 3b
Square
Opening
Tab
Attaching
Wire Retainer
to Screw Peg
• Fit a #8 x 1" screw through a wire retainer and into the
screw peg at the center of the vehicle body. The
square opening in the wire retainer should fit onto the
tab on the screw peg (3a).
• Tighten the screw with a Phillips screwdriver. Do not
over-tighten.
• Place the wires between the wire retainer arms (3b).
• Twist the ends of the wire retainer arms together to
secure the wires against the bottom of the vehicle
body (3c).
9
Wire Retainer
Bottom View
3c
Wire Retainer
Twisting
Correctly
Wire Retainer
Twisted