Meridian G96 Installation Manual page 14

 0
I n s t a l l i n g t h e
D V D p l a y e r
To connect using component video
If your television, monitor, or projection system includes component
video inputs, but no HDMI or DVI-HDCP, these will give the highest
possible quality from DVD-Videos.
• Connect the appropriate component outputs from the DVD player
to the component video inputs, using suitable video cables.
To connect using S-video
• Connect the S-video output to a corresponding input on a
television, monitor, or video control unit, using a suitable S-video
cable.
The S-video output is recommended if your other equipment
provides a choice of both S-video and composite inputs.
G96 DVD Player
S-VIDEO COMP COMPONENT
VIDEO LEADS
G96 DVD Player
S-VIDEO COMP COMPONENT
S-VIDEO LEAD
Television/monitor
COMPONENT
IN
Television/monitor
S-VIDEO
IN
The S-video output is always active, irrespective of the Video
output setting.