Dash Assembly
6
BACK VIEW
•
At an angle, fi t the tabs on the dash assembly into the
slots in the vehicle.
7
•
Insert two screws into the dash assembly. Tighten
the screws.
20
INSIDE VIEW
8
•
Apply label exactly as shown in the illustration. Avoid
repositioning the label after it has been applied.
P2896pr-0920
ASSEMBLY
9
•
Fit the steering column assembly down through the
Screws
opening in the dash.
Steering
Column Cap
10
•
Carefully turn the vehicle on its side.
•
Fit the end of the steering column through the hole in
the steering linkage.
•
Fit the steering column cap onto the end of the
steering column.
11
•
Insert a screw into the hole in the steering column cap.
Tighten the screw.
•
Turn the vehicle upright.
8
Steering Wheel Assembly
BOTTOM VIEW
Screw