Fisher-Price POWER WHEELS P5921 Owner's Manual page 9

#10 Lock Nut
5
• Insert a #10 x ¾" trusshead screw through the front end of the
vehicle and through the hole in the bracket.
• Attach the #10 lock nut to the end of the trusshead screw.
• While holding the lock nut in place with an adjustable wrench,
tighten the screw.
6
• Turn the vehicle upright.
• Fit the steering wheel cap into the center of the steering wheel.
• Insert two #6 x 1" screws through the steering wheel cap and
into the steering wheel. Tighten the screws.
ASSEMBLY
#10 x ¾"
Trusshead Screw
Lock Nut
Screw
Steering
Wheel Cap
Steering
Wheel
DASH VIEW
9
Lock Fastener Tabs
Locked
7
• Insert the seat front tabs into the slots inside the vehicle.
• Then, insert the lock fastener tabs on the back of the seat into the
slots in the vehicle.
• Using a slotted screwdriver, turn each lock fastener a 1/4 turn to
the locked position.
IMPORTANT! Remember to keep the lock fasteners locked
at all times to prevent children from accessing the vehicle
battery compartment.
Slots
Tab Tab
Tab
Tab
8
• Turn the vehicle upright (or keep it on its side).
• Insert one of the tabs on the hubcap cover into a slot in
the hubcap.
• Then, push with your fingernail (or carefully with a slotted
screwdriver), the other two hubcap cover tabs into the slots in
the hubcap.
• Repeat this assembly step to attach the other three
hubcap covers.
Unlocked
Seat
REAR VIEW
Hubcap
Hubcap Cover
SIDE VIEW
H3428pr-0720 P6830a-0920