Table of Contents
Advertisement
3.
Remove the memory module from its wrapping.
4.
Hold the memory module so that its edge connector is facing the socket. Make
sure the notch on the corner of the memory module mates with the notch on the
socket.
Figure 6-3. Securing the Memory Module
5.
Insert the memory module into the socket and gently push it until it is firmly
seated ( ).
6.
Slowly move the memory module to a horizontal position until the locking tabs
snap into the retaining notches or holes at each end of the module ( ).
7.
Replace the keyboard and push back the locking knobs.
Removing a Memory Module
Follow the steps below to remove a memory module:
1.
Turn off the notebook and unplug the AC adapter.
2.
Open the keyboard as described in the previous section.
3.
Remove the locking tabs from the memory module at the same time until the
memory module comes out of the notches. Gently move the memory module
upward and remove it.
Figure 4. Removing the Memory Module
Hardware Expansion 6-5
6
Advertisement
Table of Contents
