Navigation System - Mazda Cx-5 Smart Start Manual

Navigation System

TO REMOVE OR INSERT THE MAP SD
1 T urn the vehicle ignition OFF.
2 L ocate the sliding door on the lower left
side of the dash and slide it open (right).
• R emove card: Push the card once, then pull it out.
• I nsert card: Push the card in (label-side up), then slide door closed (left).
NOTE:
• V isit www.mazdausa.com/navigation within 60 days of vehicle delivery and
download the most recent map available for your device for free. In order to
download or upgrade your map, the TomTom Home software must be downloaded.
Please refer to the Navigation System Owners Manual section of
www.mazdausa.com/navigation for additional information.
•
O nly use your MAP SD card for operating and updating your navigation system. Do not
insert the MAP SD card into another vehicle or into any other device such as a camera.
•
I f your vehicle is not equipped with a factory navigation system, your audio system
can be upgraded to include navigation. Contact your Authorized Mazda Dealer for
more details.
PLANNING A ROUTE USING THE TOUCH-SCREEN
IMPORTANT: In the interest of safety and to reduce distractions while you
are driving, you should always plan a route before you start driving.
To plan a route on your Navigation system, do the following:
1 P ush the NAV button to access the Navigation System.
2 T ap the screen (above) to open the MAIN MENU (below).
33
Navigation System
3 T ouch Navigate to.
4 T ouch Address.
NOTE:
is available if the vehicle is equipped
with the 5.8" LCD screen. Contact your
Authorized Mazda Dealer for more details.
CARD:
Factory Navigation System
SD Card