USA_NAVI_EN.book 42 ページ 2012年9月11日 火曜日 午前10時36分
Updating your device with the new application
After the new application version has been put onto the MAP SD-card, you need to update
your navigation device. Do the following:
1. Insert the SD-card into the navigation device and close the door.
Tip: Do not use force to insert the SD-card. Make sure that the SD-card label is visible
when inserting the card.
2. Turn the ignition key to the accessory setting.
The radio comes on but the engine is not started.
3. After approximately 10 seconds, press the NAVI button to see the navigation screen.
The following screen should be shown:
After about 1 minute the screen changes to the following screen. After the given time the
update starts automatically.
42