Error Messages; Maintenance; Specifications - Sharp WA-MP50H Operation Manual

Error messages

ERROR MESSAGES MEANING
Low Battery! Can Recording is impossible due to
Not Record low battery.
(Replace the battery.)
Disk Is Full! Can Not Memory is full and recording is
Record impossible.
(Delete some data to make
room.)
Low Battery! Shut The battery has run out.
(Replace the battery.)
Down...
> HOLD < The HOLD switch is turned on.
(Turn off the HOLD switch.)

Maintenance

! Cleaning
When the unit becomes dirty
Clean it with a soft cloth. When the unit is excessively
dirty, use a soft cloth dampened in water (external sur-
faces only).
Clean the plugs and the connecting sockets.
If the plugs or sockets are dirty, noise may be heard.
Cleaning will prevent noise.
Caution:
" Do not use chemicals for cleaning (petrol, paint thin-
ner, etc.). It may damage the cabinet finish.
" Do not apply oil to the inside of the unit. It may cause
malfunctions.
WA-MP50H TINSEA075SJZZ

Specifications

As a part of our policy of continuous improvement, SHARP
reserves the right to make design and specification changes
for product improvement without prior notice. The perfor-
mance specification figures indicated are nominal values of
production units. There may be some deviations from these
values in individual units.
Power source: DC 1.5 V: "AAA" size alkaline bat-
tery (LR03 or similar) x 1
DC 5 V: USB bus power
Dimensions: Width: 54 mm (2-2/16")
Height: 56 mm (2-2/16")
Depth: 14 mm (0-9/16")
Weight: 41 g (1.5 oz.) without battery
Sockets: Earphones (impedance: 32 ohms)
USB port
Line-input socket (150 mV)
Frequency 20 - 20,000 Hz
response:
Output power: 8 mW + 8 mW (earphones: 32 ohms)
(maximum output level)
Battery life: Continuous recording:
(alkaline battery) MIC: Approx. 8 hours
LINE-IN: Approx. 3 hours
FM: Approx. 4 hours
Continuous play: Approx. 15 hours
Frequency range: FM: 87.5 - 108 MHz
05/8/4
WA-MP50H
D
F
S
V
I
N
P
E
46
WA-MP50H_SCA.fm
1
2
3
4
5
6
7
8